Solar PV
-
HELLERMANNTYTON PHOTOVOLTAIC DC DISCONNECT
596-00238E MATERIAL 840/926 UV STABLE VARIABLE IMPRINT SOLAR RATING LABEL, WHITE VINYL WITH ACRYLIC LAMINATE, UV RESISTANT INK, SPECIAL HIGH-BOND ADHESIVE FOR USE ON ENAMEL AND POWDER COAT PAINTED SURFACES, UL969 CERTIFICATION
-
WARNING ELECTRIC SHOCK HAZARD DC VOLTAGE IS ALWAYS PRESENT WHEN SOLAR MODULES ARE EXPOSED TO SUNLIGHT
596-00496 NEC690.17(E) 2014 "WHERE ALL TERMINALS OF THE DISCONNECTING MEANS MAY BE ENERGIZED IN THE OPEN POSITION, A WARNING LABEL SHALL BE MOUNTED ON OR ADJACENT TO THE DISCONNECT MEANS."
-
WARNING ELECTRICAL SHOCK HAZARD THE DC CONDUCTORS OF THIS PHOTOVOLTAIC SYSTEM ARE UNGROUNDED AND MAY BE ENERGIZED
596-00588 NEC690.35(F) 2014 "A PHOTOVOLTAIC POWER SOURCE SHALL BE LABELED AT EACH JUNCTION BOX, COMBINER BOX OR DISCONNECT, AND DEVICE WHERE ENERGIZED, UNGROUNDED CIRCUITS MAY BE EXPOSED DURING SERVICE."
-
HELLERMANNTYTON WARNING ELECTRICAL SHOCK HAZARD DO NOT TOUCH TERMINALS TERMINALS ON BOTH LINE AND LOAD SIDES MAY BE ENERGIZED IN THE OPEN POSITION DC VOLTAGE IS ALWAYS PRESENT WHEN SOLAR MODULES ARE EXPOSED TO SUNLIGHT
596-00232 MATERIAL 443/552 UV STABLE FLEXIBLE WHITE VINYL WITH ACRYLIC LAMINATE, UV RESISTANT INK, SPECIAL HIGH-BOND ADHESIVE FOR USE ON ENAMEL AND POWDER COAT PAINTED SURFACES, UL969 CERTIFICATION,
-
HELLERMANNTYTON CAUTION SOLAR ELECTRIC SYSTEM CONNECTED
596-00245 MATERIAL 242/552 UV STABLE REFLECTIVE WHITE VINYL WITH ACRYLIC LAMINATE, UV RESISTANT INK, SPECIAL HIGH-BOND ADHESIVE FOR USE ON ENAMEL AND POWDER COAT PAINTED SURFACES, UL969 CERTIFICATION,
-
HELLERMANNTYTON MAIN PV SYSTEM AC DISCONNECT
596-00255 MATERIAL 242/552 UV STABLE REFLECTIVE WHITE VINYL WITH ACRYLIC LAMINATE, UV RESISTANT INK, SPECIAL HIGH-BOND ADHESIVE FOR USE ON ENAMEL AND POWDER COAT PAINTED SURFACES, UL969 CERTIFICATION
-
HELLERMANNTYTON METAL EDGE CLIP
151-00982 SOLAR MODULE STAINLESS STEEL EDGE CLIP FOR WIRE MANAGEMENT, FITS 1MM TO 3MM PANEL THICKNESS WITH A 5MM TO 7.6MM CABLE RANGE, HIGH EXTRACTION FORCE FOR WITHSTANDING EXTREME CONDITIONS
-
WARNING TURN OFF PHOTOVOLTAIC AC DISCONNECT PRIOR TO WORKING INSIDE PANEL
596-00499 NEC110.27(C) 2014 "ENTRANCES TO ROOMS OR OTHER GUARDED LOCATIONS THAT CONTAIN EXPOSED LIVE PARTS SHALL BE MARKED WITH CONSPICUOUS WARNING SIGNS FORBIDDING UNQUALIFIED PERSONS TO ENTER" OSHA19110.145(F)(7) "WARNING TAGS ARE USED TO REPRESENT A HAZARD LEVEL BETWEEN "CAUTION" AND "DANGER""
-
WARNING SINGLE 120-VOLT SUPPLY DO NOT CONNECT MULTIWIRE BRANCH CIRCUITS
596-00591 NEC690.10(C) 2014 "THE INVERTER OUTPUT OF A STAND-ALONE SOLAR PHOTOVOLTAIC SYSTEM SHALL BE PERMITTED TO SUPPLY 120 VOLTS TO SINGLE-PHASE, 3 WIRE, 120/240-VOLT SERVICE EQUIPMENT OR DISTRIBUTION PANELS WHERE THERE ARE NO 240 VOLT OUTLETS AND WHERE THERE ARE NO MULTIWIRE BRANCH CIRCUITS. IN ALL INSTALLATIONS, THE RATING OF THE OVERCURRENT DEVICE CONNECTED TO THE OUTPUT INVERTER SHALL BE LESS THAN THE RATING OF THE NEUTRAL BUS IN THE SERVICE EQUIPMENT. THIS EQUIPMENT SHALL BE MARKED WITH THE FOLLOWING WORDS OR EQUIVALENT."
-
HELLERMANNTYTON WARNING ELECTRIC SHOCK HAZARD NORMALLY GROUNDED CONDUCTORS MAY BE UNGROUNDED AND ENERGIZED
596-00234 MATERIAL 443/552 UV STABLE FLEXIBLE WHITE VINYL WITH ACRYLIC LAMINATE, UV RESISTANT INK, SPECIAL HIGH-BOND ADHESIVE FOR USE ON ENAMEL AND POWDER COAT PAINTED SURFACES, UL969 CERTIFICATION,