Solar PV
-
SNAPNRACK BONDING L FOOT 90 DEGREE CLEAR
242-09018, PRE-ASSEMBLED HARDWARE, 200LBS DESIGN UPLIFT LOAD
-
CAUTION: SOLAR ELECTRIC SYSTEM CONNECTED
596-00613 NEC 690.13(B) 2014 EACH PHOTOVOLTAIC SYSTEM DISCONNECTING MEANS SHALL BE PERMANENTLY MARKED TO IDENTIFY IT AS A PHOTOVOLTAIC SYSTEM DISCONNECT. NEC 690.15 2014 IF THE EQUIPMENT IS ENERGIZED FROM MORE THAN ONE SOURCE, THE DISCONNECTING MEANS MUST BE GROUPED AND IDENTIFIED.
-
WARNING SINGLE 120-VOLT SUPPLY DO NOT CONNECT MULTIWIRE BRANCH CIRCUITS
596-00591 NEC690.10(C) 2014 "THE INVERTER OUTPUT OF A STAND-ALONE SOLAR PHOTOVOLTAIC SYSTEM SHALL BE PERMITTED TO SUPPLY 120 VOLTS TO SINGLE-PHASE, 3 WIRE, 120/240-VOLT SERVICE EQUIPMENT OR DISTRIBUTION PANELS WHERE THERE ARE NO 240 VOLT OUTLETS AND WHERE THERE ARE NO MULTIWIRE BRANCH CIRCUITS. IN ALL INSTALLATIONS, THE RATING OF THE OVERCURRENT DEVICE CONNECTED TO THE OUTPUT INVERTER SHALL BE LESS THAN THE RATING OF THE NEUTRAL BUS IN THE SERVICE EQUIPMENT. THIS EQUIPMENT SHALL BE MARKED WITH THE FOLLOWING WORDS OR EQUIVALENT."
